• Cards Can Easily Be Revalued
A special Administrator card is used to initially value all cards, revalue reuseable cards, and to set control parameters and prices.
• Four Copy Type Prices Supported
Depending on copier make and model, and copier control mode selected, individual prices for up to four different image types are supported.
• Works With HP FIH Enabled Multifunctionals
The TC4N is ideal for use with HP MFPs that have the FIH connector.
• Vends Copies and Prints on Canon Color MFPs
The TC4N will vend copies and prints on most Canon color (and B&W) MFPs , without need of any special software, or a print release station.
>>Canon Copy and Print Vend / No Software<<
Click here for a list of supported MFPs. Click here to download an installation and user's manual. The secure printing method is used with this vending solution. Please contact us if you have any questions.
• Supports Konica-Minolta Vendor Mode 2
The TC4N seamlessly integrates with Konica-Minolta's serial copier interface, and its vendor mode 2 protocol, allowing for vending of color copies on color Bizhubs.
• Card Value Can Be Automatically Revalued by Account Number
The TC4N can be set up to automatically revalue a range of account cards, on a set date, either by writing a new value, or adding to the card's existing value.
• Usage and Account Statistics Easily Viewed
Usage and account statistics can be read out on the TC4N's LCD display, or printed out on a P200N or similar portable printer.
• Small Footprint
The TC4N has a small footprint, measuring only 4" x 3.5" x 7", and weighs a mere 2 lb. An optional stand can be ordered, if desired.
Buying the TC4N Card Reader
To purchase the TC4N Card Reader, make your selection below (by copier type, if you know it), and press the Add to Cart button. The TC4N Card Reader is sold as a stand-alone unit, for copy vending only, or in the case of many color Canon MFPs, for copy and print vending.
The TC4N power supply and copier specific harness are included in the price shown. In some cases, an internal kit must be purchased separately from the copier manufacturer. Shipping and handling are added to your order total later.
If you have any questions whatsoever, please give us a call by pressing the Call Me button at the top of this page, or sending us an email.
The TC4N is warrantied against manufacturing defects for a period of one year from date of shipment, to be determined by the serial number displayed on its screen at bootup.
Advanced Technologies (Tekvend) agrees to repair or replace at its discretion any TC4N within the warranty period. Advanced Technologies (Tekvend) agrees to pay ground return shipping and insurance on any warranty repair or replacement.
Advanced Technologies (Tekvend) cannot be responsible for any damage that occurs to product returned to it due to inadequate return shipment procedures. The shipper is responsible for ensuring that return shipment packaging is adequate and that the return shipment is adequately insured.
Advanced Technologies (Tekvend) does not warranty its product for damage caused by abusive use, vandalism, improper installation, and improper field repair. The installer is expected to use the original copier specific harness (sprig) supplied by Advanced Technologies (Tekvend), and install the TC4N on the originally specified copier, unless otherwise authorized.